Forest Service NVUM Survey - response

Current NVUM Survey

VIEW CORRIDOR form

Q1: Will there be interviews at this site TODAY?

• Yes (Conduct Basic Form surveys for 2 hours after each traffic count period)

• No (Take a 30 minute break in between each traffic count period)

IF YES TO Q1:

Traffic Count Period 1: Conduct hand tally counts for a period of one hour. Conduct commercial vs. non-commercial counts until either the commercial or non-commercial count reaches 100, then switch to counting with only the hand tally end count for the rest of the hour.

Commercial Traffic Count

The count can not be more than 100 for either commercial or non-commercial traffic.

Non-Commercial Traffic Count

The count can not be more than 100 for either commercial or non-commercial traffic.

Hand Tally End Count

To reset the count to the combined total from the commercial and non-commercial counts after entering hand tally counts, press the reset button when it appears.

Interview Period 1: Conduct interviews for 2 hours

Interviewer say: The Forest Service is conducting interviews of visitors traveling this route. The information collected will help us better understand why people travel this route. The information will be used in some management decisions forest managers have to make. Your participation is voluntary and your answers are confidential.

Follow protocol for NVUM interview using the Basic Form.

Traffic Count Period 2: Conduct hand tally counts for a period of one hour. Conduct commercial vs. non-commercial counts until either the commercial or non-commercial count reaches 100, then switch to counting with only the hand tally end count for the rest of the hour.

Commercial Traffic Count

The count can not be more than 100 for either commercial or non-commercial traffic.

Non-Commercial Traffic Count

The count can not be more than 100 for either commercial or non-commercial traffic.

Hand Tally End Count

To reset the count to the combined total from the commercial and non-commercial counts after entering hand tally counts, press the reset button when it appears.

Interview Period 2: Conduct interviews for 2 hours

Interviewer say: The Forest Service is conducting interviews of visitors traveling this route. The information collected will help us better understand why people travel this route. The information will be used in some management decisions forest managers have to make. Your participation is voluntary and your answers are confidential.

Follow protocol for NVUM interview using the Basic Form.

IF NO TO Q1:

Traffic Count Period 1: Conduct hand tally counts for a period of one hour. Conduct commercial vs. non-commercial counts until either the commercial or non-commercial count reaches 100, then switch to counting with only the hand tally end count for the rest of the hour.

Commercial Traffic Count

The count can not be more than 100 for either commercial or non-commercial traffic.

Non-Commercial Traffic Count

The count can not be more than 100 for either commercial or non-commercial traffic.

Hand Tally End Count

To reset the count to the combined total from the commercial and non-commercial counts after entering hand tally counts, press the reset button when it appears.

Remember to take a 30-minute break between Commercial vs. Non-Commercial count periods.

Traffic Count Period 2: Conduct hand tally counts for a period of one hour. Conduct commercial vs. non-commercial counts until either the commercial or non-commercial count reaches 100, then switch to counting with only the hand tally end count for the rest of the hour.

Commercial Traffic Count

The count can not be more than 100 for either commercial or non-commercial traffic.

Non-Commercial Traffic Count

The count can not be more than 100 for either commercial or non-commercial traffic.

Hand Tally End Count

To reset the count to the combined total from the commercial and non-commercial counts after entering hand tally counts, press the reset button when it appears.

Remember to take a 30-minute break between Commercial vs. Non-Commercial count periods.

Traffic Count Period 3: Conduct hand tally counts for a period of one hour. Conduct commercial vs. non-commercial counts until either the commercial or non-commercial count reaches 100, then switch to counting with only the hand tally end count for the rest of the hour.

Commercial Traffic Count

The count can not be more than 100 for either commercial or non-commercial traffic.

Non-Commercial Traffic Count

The count can not be more than 100 for either commercial or non-commercial traffic.

Hand Tally End Count

To reset the count to the combined total from the commercial and non-commercial counts after entering hand tally counts, press the reset button when it appears.

Remember to take a 30-minute break between Commercial vs. Non-Commercial count periods.

Traffic Count Period 4: Conduct hand tally counts for a period of one hour. Conduct commercial vs. non-commercial counts until either the commercial or non-commercial count reaches 100, then switch to counting with only the hand tally end count for the rest of the hour.

Commercial Traffic Count

The count can not be more than 100 for either commercial or non-commercial traffic.

Non-Commercial Traffic Count

The count can not be more than 100 for either commercial or non-commercial traffic.

Hand Tally End Count

To reset the count to the combined total from the commercial and non-commercial counts after entering hand tally counts, press the reset button when it appears.

Remember to take a 30-minute break between Commercial vs. Non-Commercial count periods.